AMI UCPX13-40C4HR23 Pillow Block Ball Bearing Units

Lateral Width L(mm):40; Shape:Bottom Mount; Bearing Retained:No; Seals:DD (Contact Rubber S; Height H(mm):25 ～ 40; Housing Material:1045 Carbon Steel; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Part Number:6001;

Dz:70 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:1.14 kg; A1:12 mm; Designation of bearing:UC206-20G2L3; Designation of housing:FE206N-; e:20 mm; Designation of open end cover:SCOU206-20; T min.:-20 °C;

C0:11.5 kN; d1:42.8 mm; B:34.9 mm; S:16.7 mm; T min.:-40 °C; s1:33.35 mm; d:22.22 mm; Designation of bearing:EX305-14G2T04; G:M6x1; Designation of housing:P305-;

Bearing I.D. d(mm):4; Bearing Retained:No; Days to Ship:7 Days; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Shape:Flanged Pilot Type; Number of Bearings:Double; Width T(mm):20 ～ 30; Bearing Retained:No; Shape:Flanged Pilot Type;

r1a max:2.5 mm; Brand:NTN; Min operating temperature, Tmin:-40 °C; Mass:0.57 kg; D:130 mm; C:28.5 mm; Max operating temperature, Tmax:120 °C;

L:140 mm; G:M6x1; d1:37.4 mm; C:14 kN; A1:26 mm; Designation of housing:P205N-; Designation of closed end cover:SCCE205; s1:24.2 mm; B:21.4 mm; Designation of bearing:ES205G2T04;

Diameter series symbol:Used for Light load; Stroke:No; d:55; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):52400; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Basic Load Rating, St

Designation of bearing:UC206G2T04; H:148 mm; N:16mm; T min.:-40 °C; Weight:0.92 kg; Z:27.5 mm; d:30 mm; G:M6x1; A1:13 mm; L:80 mm;

S:10.5 mm; d:55 mm; Recommended tightening torque for set screw:18.7 Nm; B1:48.4 mm; Weight:1.03 kg; G:M10x1,25; C:21 mm; C0:25.5 kN; d1:76.2 mm; B2:20.7 mm;

Seal:Nitrile; Surface Treatment:No; Days to Ship:Quote; Surface Treatment:No; Pillow Type, Category:Thick Wall; Basic Load Rating, Dynamic Rating(N):57200; Pillow Type, Category:Thick Wall; RoHS:6; Basic Load Rating, Static Rating(N):40100; Bearing Unit, Type:Pillow Type;

Shape:Flanged Pilot Type; Days to Ship:7 Days; Holder Surface Treatment:Clear Anodize; Flange Shape:Square Type; Number of Bearings:Single; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6202; Bearing Material:[Steel] Steel; Volume Discount:Available;

Unit Body Material:Cast Iron; Days to Ship:Quote; Stroke:No; Fit:J7; Seal:Nitrile; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):29400; d:50; Unit, Type:Insert Bearing Unit;

N:M10; Designation of housing:PA205-; d1:37.4 mm; L1:27 mm; C0:7.88 kN; Weight:0.74 kg; s1:30.9 mm; E:15 mm; B1:44.3 mm; S:17.4 mm;

Bearing Inner Dia. Shape:Tapered hole adapter; Grease Type:Standard Grease; Rolling Element Material:Bearing Steel; Fit:J7; Unit Body Material:Cast Iron; Stroke:No; Bearing Unit, Type:Pillow Type; Basic Load Rating, Static Rating(N):45000; Surface Treatment:No; Rolling Element Material:Bearing Steel

N:29mm; C:31.85 kN; L:144 mm; Weight:2.39 kg; Recommended tightening torque for set screw:11.5 Nm; N1:19 mm; T min.:-40 °C; A:49 mm; H:117 mm; s1:33.4 mm;