Tapered Roller Bearing Cones

Contact Now

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.

Timken 94705TD Tapered Roller Bearing Cones

No Available
Bearings with Housin Square Type

Timken 19145D #3 Prec Tapered Roller Bearing Cones

4.39 Hz 0.6 mm
11 mm 0.6 mm

Timken 94703W Tapered Roller Bearing Cones

Standard Flat
6 Rubber Sealed

Timken 15580 #3 Prec Tapered Roller Bearing Cones

Bearing Steel Cylindrical Bore Set
No Insert Bearing Unit

Timken 93800D Tapered Roller Bearing Cones

Oui/Yes 16.8 mm
11,000 rpm 19.2 kN

Timken 3779 #3 Prec Tapered Roller Bearing Cones

161 mm 20.7 mm
35 mm -20 °C

Timken 81590-20024 Tapered Roller Bearing Cones

Electroless Nickel P 8 Days
Deep Groove Ball Bea [Steel] Steel

Timken 81629 Tapered Roller Bearing Cones

No J7
Used for Light load With steel plate cov

Timken 3585 #3 Prec Tapered Roller Bearing Cones

Single Deep Groove Ball Bea
ZZ (Double Shield) Bearings with Housin

Timken 1380 #3 Prec Tapered Roller Bearing Cones

Steel Flat
No Standard
1/13